Lixada 2.4G ISM DMX512 Wireless Male XLR Transmitter Receiver LED Lighting for Stage PAR Party Light with Antenna

This wireless transmitter / receiver can help you to get rid of countless wire.

Features:
DMX512 wireless transmitter / receiver transmits standard DMX512 protocol data (generated by console) by wireless way.
No time delay when signal data is transmitting, signal data is real time and reliably.
This product adopts a 2.4G ISM frequency section.
High effective GFSK modulate, communication design; 126 channels jumping frequency automatically, high anti-jamming ability.
126 channels jumping frequency automatically, high anti-jamming ability, to ensure works reliability.
7 groups ID code settable, user can use 7 groups individual wireless net without any interfere each other in the same place. (Tricolor LED displaying Indicators)

Specification:
2.4G wireless DMX512 R / T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 3pin male
Communication distance: 400M (visible distance)
Work frequency section: 2.4G ISM, 126 channels.frequency section
Transceiver: Receiver, transmitter (optional)
Color: Silver, black (optional)
Plug standard: US, EU, UK, AU (optional)
Material: zinc alloy + plastic
Item size: 21 * 2.5 * 2.5cm / 8.26 * 0.98 * 0.98in (L * W * H)
Package size: 14.5 * 10.5 * 4.5cm/5.7 * 4.13 * 1.77in (L * W * H)
Package weight: 180g / 6.36oz

Operating manual:
ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1). Press momentary switch above the side led indicator to indicate ID setting.
2). Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode.
3). Working condition:
LED constant lit up: No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it' s searching automatically.
5). ID Code "1-7" groups ID code, press 'KEY' for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color)

Establishing Communication：
1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.

Package list:
1 * DMX wireless transmitter / receiver
1 * Adapter
1 * Specification (English)

Lixada 2.4G ISM DMX512 Wireless Male XLR Transmitter Receiver LED Lighting for Stage PAR Party Light with Antenna

You May Also Like

Lixada 10W Solar Panel Charger 5V USB Ports for Cell Phone High Effiency Outdoor Activities Lighting Use Portable Ultra Thin Monocrystalline Silicon

Lixada DMX512 4CH*4A Decoder LED Controller 4 Channels Driver RGBW LED Strip Light DC12V-24V

Lixada LED Stage Effect Lamp Total 50W Rotating Moving Head DMX512 Sound Activated Master-slave Auto Running 11/13 Channels RGBW Color Changing Beam Light for Disco KTV Club Party

Lixada DMX-512 Mini Moving Head Light 4 In 1 RGBW LED Stage Light Lighting Strobe Professional 9/14 Channels Party Disco Show 100W AC 100-240V Sound Active

Lixada 192 Channels DMX512 Controller Console for Stage Light Party DJ Disco Operator Equipment

Lixada Rechargeable DMX512 Dfi DJ 2.4G Wireless Receiver Built-in Battery Female for Stage PAR Light Lighting Control